Yes: Massachusetts homeowners can get a no-cost home energy assessment through Mass Save, the state’s efficiency program run with utilities like National Grid and Eversource. The visit includes diagnostic testing, immediate no-cost fixes, and can open the door to 75%–100% off insulation, rebates up to $25,000, and 0% HEAT Loan financing. Getting started means calling Mass Save’s scheduling line or booking online.
TL;DR:
- The assessment includes a blower door test that measures air leaks and infrared thermography to identify insulation issues, providing reliable data for upgrades.
- Households that follow through with recommended improvements typically see a 5% to 30% reduction in utility bills, based on the home’s initial leak and insulation levels.
- Qualified residents can access up to 100% off insulation, rebates up to $25,000, and zero-interest loans, especially if they fall within income or designated equity community guidelines.
- Scheduling takes only a few minutes via phone or online, with a recommended plan to prepare utility info, ensure attic and basement access, and allocate 30 minutes to two hours for a full visit.
- Post-assessment, it is crucial to review and sign work orders promptly to secure rebates and schedule professional installation, with reinforcement through contractor verification of blower door numbers.
Table of Contents
- What Is a Home Energy Audit in Massachusetts?
- What Happens During the Assessment Visit?
- How Much Can You Actually Save?
- What Rebates and Financing Come With the Audit?
- How Do You Schedule a Mass Save Assessment?
- What Happens After the Assessment Is Done?
- Where Exterior Upgrades Fit In
- Where to Verify Program Details and Schedule Your Visit
- Why the Assessment Matters More Than the Rebate Chase
- Sources
- FAQ
What Is a Home Energy Audit in Massachusetts?
A Mass Save Home Energy Assessment is a diagnostic visit, not a sales pitch. National Grid, Eversource, and other utility sponsors fund the program jointly, which is why it costs nothing out of pocket for most single-family and small multifamily homes. An Energy Specialist walks your property attic to basement, checking insulation depth, duct condition, and air leakage before handing you a customized report.
Most one to four unit homes in Massachusetts qualify, including owner-occupied and some rental properties. Larger multifamily buildings fall under a separate Mass Save track with its own rules, so a five-unit building won’t book the same appointment as a single-family ranch. Some sponsors also offer a virtual option using a video call and homeowner-supplied photos, though it skips the blower door test that gives the most reliable leakage data. The specialist’s report becomes your roadmap. It ranks recommendations by cost-effectiveness, not by what’s easiest to sell you.
What Happens During the Assessment Visit?
The centerpiece of the visit is the blower door test: a calibrated fan mounted in your front doorway that depressurizes the house and reveals exactly how much air is escaping. Contractors use the resulting “cfm50” number to size air-sealing work and later confirm it worked. Infrared thermography follows, using a handheld camera to spot cold patches in walls and ceilings where insulation has settled, gaps have opened, or a previous contractor missed a stud bay.
Beyond the tech, the specialist does a visual walk-through covering:
- Attic and basement insulation depth and condition
- Duct leakage and insulation on heating and cooling systems
- Air leaks around window and door frames, sill plates, and recessed lighting
- Existing HVAC and water heater age and efficiency
Most visits end with a bag of no-cost items installed on the spot, typically LED bulbs, faucet aerators, and sometimes a programmable thermostat, plus a written report you can hand directly to a contractor. Builders and energy auditors often point to the same handful of leak locations showing up again and again: attic hatches, recessed lights, and where the foundation meets the framing.
How Much Can You Actually Save?
Homeowners who follow through on assessment recommendations tend to see utility bills drop 5% to 30%, depending on how leaky and under-insulated the home was to begin with. That’s a wide range, and where you land depends almost entirely on the envelope, meaning your insulation and air sealing, not your furnace.
That’s also why Mass Save pushes an envelope-first approach: tightening the building shell before touching equipment makes any furnace, heat pump, or air conditioner installed afterward run more efficiently and last longer, since it’s no longer fighting constant air leakage. Beyond the utility bill, sealing up a drafty house tends to even out room-to-room temperature swings and cut down on the dust and pollen that leak in through unsealed gaps. The EPA’s indoor air quality guidance notes that better ventilation and moisture control, both common outputs of a Mass Save visit, directly affect respiratory comfort at home.
What Rebates and Financing Come With the Audit?
An assessment by itself costs nothing, but the real financial upside shows up in what it unlocks afterward. Depending on your income and location, you may qualify for:
- 75% to 100% off approved insulation and no-cost air sealing through National Grid’s Home Energy Assessment program
- Rebates up to $25,000 for qualifying heating, cooling, and water heating equipment
- 0% HEAT Loan financing for the portion of a project rebates don’t cover
- Up to 100% off weatherization for income-eligible households, per Eversource’s Massachusetts program
Income-eligible services extend further than most homeowners assume. National Grid’s income guidelines can route qualifying households to a local Community Action Program (CAP) agency, which handles enrollment and, in many cases, coordinates no-cost weatherization directly.
Then there’s a shortcut a lot of homeowners never hear about: Designated Equity Communities. If your ZIP code falls in a DEC under the 2025–2027 plan, you can qualify for 100% weatherization without submitting a single pay stub for income verification. Check your ZIP code before assuming you need to go through the income paperwork at all.
How Do You Schedule a Mass Save Assessment?
Booking takes a few minutes, either by phone or online.
- Call 1-866-527-SAVE (the shared Mass Save scheduling line), or use the Mass Save self-scheduling tool to pick a slot without waiting on hold.
- Gather your utility account numbers and a recent bill or two so the specialist can pull your usage history ahead of the visit.
- Clear access to your attic hatch and basement, since a blocked crawlspace access panel can cut the appointment short.
- Block out time. Plan for 30 minutes on the low end and up to two hours for a full diagnostic visit, longer for older or larger homes.
A virtual option exists for homeowners who’d rather skip an in-person visit, but it relies on you taking your own photos and can’t run the blower door test, so the leakage numbers you get back are estimates rather than measurements.
What Happens After the Assessment Is Done?
The written report is only step one. Turning recommendations into actual savings means signing off on the work and getting it scheduled.
- Review the report with your specialist or a follow-up call to understand which upgrades qualify for which incentive tier.
- Sign and return contractor paperwork promptly. Incentive approvals and installation slots are tied to that signed work order, and delays here are the single most common reason homeowners miss enhanced incentive windows.
- Expect a lead vendor to run a quality assurance inspection after installation, confirming insulation was installed to spec and air sealing actually reduced the leakage number measured during your original blower door test.
- Rebates and HEAT Loan funds are typically applied by the approved contractor at time of installation rather than reimbursed to you afterward, so confirm how your specific contractor handles the paperwork.
Pro Tip: Ask your contractor for the pre and post blower door numbers in writing. That “cfm50” comparison is the clearest proof the air sealing actually worked, and it’s useful if you ever sell the house and want to show a buyer the upgrade was real.
Where Exterior Upgrades Fit In
A Mass Save report frequently points to problems that live in the exterior shell: thin attic insulation, drafty old double-hung windows, gaps around door frames, or siding that’s stopped doing its job as a weather barrier. That’s the layer Bruin Corp of Attleboro has worked in for more than 40 years, translating an assessment’s findings into insulation upgrades, window replacements, and siding work that actually close the gaps a blower door test flags.
If you’re vetting a contractor to act on your report, a short checklist helps:
- Confirm the contractor is licensed and insured for the specific trade (insulation, windows, siding, or roofing)
- Ask for a written scope tied directly to your assessment report, not a generic upsell list
- Get a realistic installation timeline in writing before signing
- Review financing paperwork carefully if you’re using a home remodeling loan to cover costs beyond what rebates offset
Homeowners in Attleboro area communities have used this same sequence, assessment first, then targeted exterior work, to stack Mass Save rebates against remodeling costs rather than paying full price for upgrades the program partially covers.
Where to Verify Program Details and Schedule Your Visit
Start directly with Mass Save for eligibility and scheduling, and check National Grid’s or Eversource’s assessment pages if you already know your utility sponsor. For background on the mechanics behind the recommendations, the DOE’s Energy Saver resources cover ventilation and efficiency basics that inform what your specialist will tell you.
Why the Assessment Matters More Than the Rebate Chase
Most coverage of Massachusetts energy programs leads with the dollar figures, the $25,000 rebate cap, the 0% loan, the 100% weatherization for DEC ZIP codes. Those numbers are real and worth pursuing, but they’re not the part that actually determines whether your house gets more comfortable and your bills go down.
The assessment itself is the leverage point. A blower door test gives you a number you can hold a contractor to. Skip the audit and go straight to a window or insulation quote, and you’re relying on a salesperson’s visual guess instead of measured data.
If there’s one place conventional advice falls short, it’s treating the audit as a formality before the “real” work. Treat it as the actual work. Read the report, ask for the cfm50 numbers, and pick a contractor who will address what the report says, not what’s convenient to sell. The incentives are generous. They’re just not the whole story.
— Jess
Sources
- Mass Save
- National Grid — Home Energy Assessments (MA)
- Eversource — Massachusetts Home Energy Assessment
- Mass Save — Self Scheduling
FAQ
How Can I Get a Home Energy Assessment in Massachusetts?
Call the Mass Save scheduling line at 1-866-527-SAVE or use the online self-scheduling tool to book a visit with your utility’s sponsor, typically National Grid or Eversource.
How Much Does a Home Energy Audit Cost?
The standard Mass Save Home Energy Assessment is offered at no cost to most eligible Massachusetts homeowners, and homeowners who qualify for income-based programs can also access no-cost weatherization work afterward.
Can I Do My Own Energy Audit?
You can do a basic DIY check for drafts and obvious insulation gaps, but you won’t have access to a blower door test or infrared camera, which is where most hidden leaks actually get found.
Does Massachusetts Have a Window Replacement Program?
Mass Save doesn’t run a stand-alone window rebate, but an assessment can identify draft problems around old windows and point you toward equipment rebates and financing options like the 0% HEAT Loan that can help cover replacement costs.